Single breasted overcoats, your specification
Made to your tech pack, fabric and colours by a factory matched to the order.
Private label
Your main label, care label, hangtag and polybag. Nominated trims accepted.
A single breasted overcoat is the plain fronted, knee length wool coat most menswear and unisex outerwear ranges are built around: three or four buttons, a notch lapel, flap pockets and a back vent. Brands and department stores carry it as a core line in navy, charcoal and camel. Choosing a single breasted overcoat manufacturer in Bangladesh means finding a factory that cuts tailored outerwear, because this coat is judged on how the lapel rolls and the hem hangs.
The desk sends your block, or a reference coat, and the cloth you want to two factories on the bench. Their figures come back side by side with the front construction, lining and cloth each one priced, so a lower number resting on a fused front shows before you pay for a sample.
Kinds of single breasted overcoat
Three button notch lapel overcoat
The standard block. The lapel rolls to the top button or just below it, the hem ends at or just below the knee, and two flap pockets sit at the hip. The core line other styles grade from.
Four button overcoat
The buttons start higher, so the lapel is shorter and the coat closes nearer the neck. It suits colder markets and customers who wear it buttoned over a scarf.
Fly front overcoat
The buttons sit behind a concealed placket, leaving a clean front with nothing showing. The placket adds a layer of cloth and a pressing step, and hides a plainer button.
Raglan sleeve overcoat
The sleeve runs in one piece up to the collar, so there is no shoulder pad or sleeve head to set. It fits more shoulder shapes and suits a softer, casual version of the coat.
What a single breasted overcoat manufacturer in Bangladesh needs from you
- Button stance
- The number of buttons and the height of the top one from the high point of the shoulder. The stance sets where the lapel breaks, so fix it on the first fit sample.
- Lapel and under collar
- Lapel width at its widest, usually 9 to 11 cm on an overcoat, the gorge height and the notch angle. An under collar in felt or melton keeps the roll in shape.
- Length and vent
- Back length from the collar seam for the sample size, and the vent: one centre vent, two side vents or none, with its length.
- Pockets
- Flap pockets at the hip are the norm. Add a ticket pocket, a slanted angle or a welt chest pocket only if wanted, plus the inside pockets.
- Front construction
- Fused, half canvas or full canvas. Half canvas floats a chest piece in the chest and lapel over a fused lower front; full canvas runs to the hem and costs most in labour.
- Cloth and lining
- Fibre content, weave and weight, usually 450 to 650 GSM for this coat, plus a viscose or polyester twill lining and the shoulder pad thickness.
Tests for a single breasted overcoat
- ISO 3801
- Checks a melton's mass per unit area against the weight ordered. Cloth delivered light hangs differently on a long coat, so ask for the result on bulk, not only the approved swatch.
- ISO 12945-2
- Pilling by the modified Martindale method. Soft milled wool pills at the collar, the cuffs and under a bag strap; ask for the grade before approving the cloth for cutting.
- RWS (Responsible Wool Standard)
- Needed for a responsibly sourced wool claim, with transaction certificates down the chain. Coat ranges planned past 2026 should note that RWS is folding into Textile Exchange's Materials Matter Standard, with audits to it from 31 December 2026.
What moves the price of a single breasted overcoat
- Front construction: a fused front costs least, half canvas adds a chest piece and hand work, full canvas the most.
- Wool share and cloth weight, and whether the mill weaves it to order or holds it in stock.
- Pattern matching on a check or herringbone across fronts, pockets and centre back, which uses extra cloth.
- Lining: viscose twill costs more than polyester, and a contrast sleeve lining adds a second cut.
- Hand finishing such as pick stitching along the lapel edge or a hand felled under collar.
Lead time for single breasted overcoats
The overcoat's own steps sit on top of the usual sample and bulk windows. A cloth woven or dyed to order adds mill time before the first panel is cut, and a half canvas front can need a second fit round to settle the lapel roll. Both show up in the quote, and order confirmation to shipment usually takes 60 to 90 days.
What we check on single breasted overcoats before shipment
- Lapel rollBoth lapels roll to the same point above the top button and lie flat on the chest, with no crease or bubble in the canvas.
- Front edges at the hemButtoned on a stand, the fronts meet evenly at the hem instead of swinging apart or crossing over.
- VentThe vent hangs closed and straight, laps the correct way, and is bar tacked at the top.
- Pocket flapsBoth flaps sit level at the graded height, with no lining showing at the corners of the pocket mouth.
Questions buyers ask about single breasted overcoats
Half canvas or fused: which front should a single breasted overcoat have?
Half canvas, if the coat is sold on its line. The floating chest piece lets the lapel roll and holds its shape through steaming and dry cleaning, where a fused front can bubble once the adhesive lets go. Fused makes sense at an entry price or on a casual raglan version. Ask for both on the quote to see the gap.
Three buttons or four on an overcoat?
Three buttons gives the longer lapel most ranges sell as the standard coat. Four buttons closes higher, keeps more warmth in and suits a colder market. Both can come from one base pattern with a different stance and lapel, which keeps the second fit sample quick.
What cloth weight should a knee length overcoat be?
Usually 450 to 650 GSM. Below about 450 GSM a knee length coat starts to read as a lighter topcoat and loses its line at the hem; a melton above 650 GSM wears warm but loads the shoulder. Judge a full hanger of the cloth at the length you will cut.
Can the overcoat use traceable wool?
Yes, if the cloth mill and the sewing factory both hold RWS scope certificates and a transaction certificate follows the wool at each step. Say so on the enquiry, because it narrows both the cloth choice and the factory bench and can lengthen cloth sourcing. Without that chain the label still states the fibre content, but the hangtag cannot carry a responsible wool claim.
Get a quote for single breasted overcoats
Tech pack or sketch with quantities per colour. A compared quote in 48 hours.
