Garment dyed chinos, your specification
Made to your tech pack, fabric and colours by a factory matched to the order.
Private label
Your main label, care label, hangtag and polybag. Nominated trims accepted.
Garment dyed chinos are sewn in undyed twill prepared for dyeing, then dyed as finished trousers in a rotary or paddle machine. The dye settles unevenly into seams, pocket edges and folds, which gives the worn-in look and soft hand that customers pay more for. Because colour arrives last, a garment dyed chinos manufacturer in Bangladesh approves shade against a band rather than one swatch, and cuts the pattern oversize to allow for shrinkage in the dye bath.
Garments Hub BD sends the enquiry to two factories on its bench with your band and dye type, so both quotes cover the same process. Shade is judged at the end, so the final random inspection at 80 percent packed checks sampled pieces against your light and dark limits. If a third party inspector of your choice judges the band instead, that report overrules ours.
Kinds of garment dyed chinos
Pigment dyed
Pigment held on the surface by a binder, then washed back for a faded, chalky colour that wears at the edges. Rub fastness is lower by design, so set a clear limit.
Reactive garment dyed
Reactive dye bonds with the cotton for a deeper, cleaner shade and better wash fastness. Polyester sewing thread will not take it and keeps its own colour.
Sulphur garment dyed
Mainly for black, navy and dark grey that fade towards a washed look with wear. Economical in deep shades; agree how much fading is the intended look.
Overdyed
Twill already dyed in the piece, dyed again as a garment to shift the shade or add depth. Gives colours a single dye cannot, at the cost of a second process.
What to agree with a garment dyed chinos manufacturer in Bangladesh
- Dye type
- Pigment, reactive or sulphur. It decides the look, the fastness, and which trims and threads change colour with the trouser.
- Shade band
- A light limit and a dark limit for every colour, approved on dyed garments rather than swatches. Bulk is inspected against that band.
- Shrinkage allowance
- Garment dyeing usually shrinks cotton twill 3 to 7 percent in length. The factory should state the allowance it cuts to and prove it on the dyed fit sample.
- Thread
- Cotton thread takes the dye and blends in; polyester core thread stays its own colour. Decide whether the stitching should be tonal or contrast.
- Trims and labels
- Buttons, zip tapes and labels pass through the dye bath. Choose dye resistant trims, or sew the brand label on after dyeing if it must stay white.
- Hand
- The softener wash after dyeing sets the feel. Name the softness you want against a reference garment.
Tests for garment dyed chinos
- ISO 105-X12
- Rubbing fastness, dry and wet, on the grey scale. Pigment dye rubs off by nature, so agree the grade a pigment shade must reach before bulk.
- AATCC 8
- The US crocking test for the same property, which buyers selling in the US often ask for on pigment shades in place of the ISO method.
- EU REACH Annex XVII, entry 43
- Azo dyes that split into listed amines are capped at 30 mg/kg in EU goods. Garment dye houses mix their own recipes, so test the dyed trouser itself.
- ZDHC MRSL
- Chemicals banned from intentional use in the dye house. A list for factories and chemical suppliers, not a product test; ask whether the dye house works to it.
What moves the price of garment dyed chinos
- The dyeing step itself, charged by the garment dye house per kilo or per piece.
- Extra twill cut into every piece to cover shrinkage in the dye bath.
- Pigment and binder against reactive dye, and the number of shades in the order.
- Pieces rejected for falling outside the shade band, more than on piece dyed cloth.
- Dye resistant buttons, zips and labels, or labels sewn on after dyeing.
Lead time for garment dyed chinos
Garment dyeing adds a step after sewing, so a dyed sample tends towards the upper end of 7 to 14 days. Bulk for a garment dyed order usually sits at the upper end of 30 to 60 days after PP approval. Each shade needs a dyed sample to approve against the band, and re-dyeing a batch outside the limits adds days.
What we check on garment dyed chinos before shipment
- Shade within the bandSampled pieces compared with the light and dark limits under controlled light, not with a single standard.
- Rope and crease marksPanels checked for streaks or lines left where garments folded against each other in the dye machine.
- Measurements after dyeingWaist, inseam and thigh measured on dyed pieces against the post dye chart, proving the shrinkage allowance worked.
- Thread and trim colourStitching and trims match the agreed tonal or contrast look, and the labels stayed legible.
Questions buyers ask about garment dyed chinos
Why does every garment dyed chino look slightly different?
Dye collects in seams, folds and thicker areas, and every machine load varies a little. That variation is what customers buy. A shade band with a light and a dark limit keeps it inside a range you have approved.
Should we choose pigment or reactive garment dye?
Pigment for a faded, vintage look that wears at the edges, accepting that it rubs off more. Reactive for a deeper, cleaner shade with better fastness. Many brands use pigment for seasonal colours and reactive for core shades.
How much shrinkage should the pattern allow for?
Usually 3 to 7 percent in length and a little less in width, depending on the twill and the dye temperature. The factory should test shrinkage on the undyed twill, cut the fit sample to it, and confirm the result on the dyed piece.
Can a garment dyed chino have white or contrast stitching?
Yes, with reactive dye and polyester thread, which does not take the colour. Pigment coats the thread as well, so the contrast is weaker. Check it on the sample, because the thread shift varies by recipe.
Get a quote for garment dyed chinos
Tech pack or sketch with quantities per colour. A compared quote in 48 hours.
